Results 1 - 15 of 145 Aijiren Tech™ Septa for 8-425 Screw Thread Caps are constructed of PTFE, PTFE/rubber, or PTFE/silicone to suit a variety of HPLC, GC ...
With the largest portfolio of sample handling; vials, plates and closures, column chemistries in a Bonded Clear PTFE/Clear Silicone MSCERT5000-30LVW.
High clarity plastic vials for easy sample viewing. • Low extractable polypropylene provide broad compatibility and low non-specific binding.
Fully lot-tested including HPLC and GC analysis Fixed micro vials or inserts for limited volume sampling. Vials. NSC PART NO. ... Bonded PTFE/Silicone.
The Finneran InterlockedTM Vial is composed of a 12x32 glass vial and a clear glass It should be a low protein binding membrane for biological samples.
Results 1 - 24 of 1000+ thread integrity HPLC sample vials graduated marking spot 9mm HPLC Vials--Lab Vials Manufacturer2ml 2 32 mm borosilicate glass hplc ...
Use in any HPLC or GC autosampler rack that accepts 12x32mm 2mL vials. Needle stroke must be set to 5mm from the bottom of the vial. Requires a minimum sample
Autosampler vials hold samples that will be injected from an autosampler into a chromatograph or similar analyzer. A needle is used to pierce the cap and
No HPLC/UHPLC or GC instrument has been left behind. Our vials and well plates are suitable for all vendors' instruments. All SureSTART products are
Chromatography Vials, Certified Clear Glass 9mm R.A.M.™ Vial, 12x32mm, and PP Open Top Cap, Royal Blue, Bonded PTFE/Silicone Slit Septa, with Graduated Spot
Snap cap closures fit all SUN-SRi 12x32mm snap/crimp vials including StepVial PTFE Disk septum is an economical choice for routine HPLC applications.
Color, Clear. bonded PTFE/silicone slit septa HPLC vials test Autosampler Vial, autosampler glass vials low protein binding thread integrity Autosampler ...
Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats 13mm Black Open-Hole Bonded Screw Cap, Red PTFE/Silicone 60mil.
HPLC Chemical Test of Vial and Cap Assembly Blue 9mm Bonded PTFE/Silicone Cap - 100 pack ... 12x32mm Limited Volume Vials (One Piece, No Assembly).
Settings for Alliance HPLC Vials and Low Volume Inserts (LVI) . Aijiren Technology recommends pre-slit PTFE/silicone septa, for venting and accurate sample draw.
