analytical bonded PTFE/silicone slit septa HPLC GC vials

Snap caps PTFE/Silicone septa (pre slit) - Elsichrom HPLC Specialist

We supply all kinds of chromatography autosampler vials from inserts of 100 µl up to 4 ml vials. Certified TOC vials (20 or 40 ml) are also provided for 

the 2008/2009 National Scientific Chromatography - Cromlab

Fully lot-tested including HPLC and GC analysis Bonded PTFE/Silicone ... PTFE/Silicone septa are most popular for HPLC and IC applications. Pre-slit ...

Certified Vials - Capital Analytical

3.5mL 15x45mm High Recovery, Clear, Black Cap, Bonded PTFE/Silicone Septum, Pre-slit, NS Certified Convenience Kit. 3.5ML CERT CLEAR MAX REC VIAL KITW/BND 

9 mm PTFE/Silicone Pre-slit Septa with Blue Cap - N9300701

The PerkinElmer 2 mL, 10 mm, Screw Top Vial with PTFE/Silicone Pre-slit Closure Kit (500/pack) hold 100 2 mL Clear Screw Top Vials and 100 preassembled 

Shimadzu's Guide to Vial Selection

analysis I do use the The non pre-slit septa helps to reduce carryover from vial to ... Temperature limit for PTFE/Silicone septa: -60°C up to 200°C.

Aijiren Tech™ 2mL, 9mm Clear Screw Top Vial Kit, Silanized

Item Description, Convenience Kit, Silanized Vial & Bonded Pre-slit Cap Septa, PTFE/Silicone, Pre-Slit, Bonded. Material, Glass. Color, Clear.

silicone slit septa HPLC vials low metal content

PTFE/Silicone septa are ideal for use in most HPLC and GC applications bonded cap-septa HPLC sample vials round bottomCertified Autosampler Vial Kit.

Chromatography closures, caps and septa - MACHEREY-NAGEL

Basic recommendations · Thick / blunt HPLC needles require soft Silicone /PTFE closures, either slit or unslit. · Snap ring closures N 11 are recommended for HPLC 

chrom4 full catalog available here

VT009MA/C397ESBCERT HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone with Slit*. For Aijiren Technology Auto Samplers.

Vials and Septa – Laboratory Consumables - Shimadzu Scientific

Caps/Septa for 1.5mL screw vials, 100/pack. Temperature limit for PTFE/Rubber septa: -40°C up to 110°C Temperature limit for PTFE/Silicone septa: -60 

Sample Vials and Accessories - Aijiren Technology Corporation

[ For all ACQUITY UPLC, HPLC, and GC Systems ] Pre-slit PTFE/Silicone (P/N 186006332 and 186006335) is ... proper curing of the silicone septa.

Certified Vials, Caps, Septa, & Inserts - NET

No-Slit. Seal, 11 mm Diameter,. Snap, PTFE/Silicone, Cert+, Certified PLUS (Cert+) 9 mm Screw-Top Vials and Caps with Bonded-In Septa.

With Our Simplified Selection of Chromatography Vials - Restek

Caps and Septa, Preassembled Red PTFE/White Silicone, 0.060” Assembled Clear 2.0 mL Vial w/Marking Spot, Cap, Bonded PTFE/Silicone Slit Septa.

Aijiren Technology Sample Vials and Accessories

LC/GC Certified Vials are UV-tested by HPLC. The HPLC test Aijiren Technology recommends pre-slit PTFE/silicone septa, for venting and accurate sample draw.

Vial Cap Septa manufacturers & suppliers - Made-in-China.com

577 products 24-410 Plastic Screw Thread Cap Bonded Silicone Septa for Vial Sealing ... 9-425 9mm Blue Gc Vials PP HPLC Septa Cap for ND9mm Screw Top Vial.