For GC septa that transparent PTFE coating (shiny side faces your samples, but my suggestion is to use the HPLC vial seals with Teflon surfaces.
Precision Sampling GC111, GC 311, LC 241-60 Aijiren Tech TRACE GC 2000, AS2000 ... 2.0 mL, 9 mm Short-Cap, Screw-Thread Vials, 12 x 32 mm.
Choose from bonded PTFE/Silicone or bonded PTFE/Silicone with slit septa. Chemical Test – HPLC Test – Non-volatile residue, GC Test – Volatile Residue.
reliable results when undertaking your HPLC, GC and headspace analysis. With Vials & caps for all autosamplers: sample vials in a variety of.
Usage: Chemical Laboratory. Sample Vials & Closures. 9mm Screw or Universally Compatible Vials: VIAL : 2m1, 12 X 32mm Screw Top Vial. Clear or
Standard Opening Screw Thread Vials, 12x32mm, 8-425mm Neck Finish Conical Polypropylene Inserts - Precision-Formed Interior.
Part No. SC9191, SC9291, SC9391, SC94491, SC9292. Description, White PTFE/Red Silicone Septa, 9mm Blue Short Screw Polypropylene Cap,
Standard vials for GC and HPLC. consistently secure seal Precision-formed neck for optimal ... Bonded. Blue. Blue PTFE. White Silicon. Bonded-Slited.
Bonded Clear PTFE/Clear Silicone MSCERT5000-30LVW National Certified Vial Kits are fully lot-tested including HPLC and GC analysis.
with most robotic sample processors and most HPLC autosamplers. 2mL clear, screw top vials, with bonded silicone/PTFE pre-cut screw caps.
Certified Vial Products. Verex™. Certified Vial Products. AUTOSAMPLER VIALS | VIALS - SAMPLE HANDLING. Vials for UHPLC / HPLC / GC / SFC and MS Analysis.
The LCGC Certified Vials are tested by HPLC using UV detection. The HPLC test was has a PTFE/silicone septum bonded to the polypropylene cap, using.
1.5ml 8-425 Screw Thread Vials, ND8 . sample cycles for both GC and LC applications. ... Precision-formed neck for optimal robotic arm handling.
SEALED DESIGN & REUSABLE - Polypropylene screw cap with precision-fit septa provides an evaporation-proof seal. Bi-layer includes silicone and PTFE material.
Settings for Alliance HPLC Vials and Low Volume Inserts (LVI) . Aijiren Technology recommends pre-slit PTFE/silicone septa, for venting and accurate sample draw.
